12V to 220V Inverter

Car_Power_Inverter_TAXI_300W

12V to 220V Inverter

Car power inverter TAXI-300W,12V to 220V car inverter
Model TAXI-300W
Power Capacity 300W
Order No. JD0704
Waveform Modified sine wave
Input voltage 12V/24VDC
Output Voltage 220VAC±10%
Frequency 50/60HZ
LED Indicator Green led for power on, red led for power failure status
Protection Over heat, over voltage, low voltage, short circuit protection
Alarm Low battery voltage
Quality Guarantee 1 Year
Packing Size(cm) 49*29.5*40.5cm/20PCS

24V to 12V Vehicle Converters 10Amp

24V to 12V Converters 10Amp

24V to 12V Converters 10Amp

  • Product Name : Car Power Supply Converter;Material : Plastic, Alloy;Input Voltage : DC 24V
  • Output Voltage : DC 12V;Output Current : 20A;Power : 240W
  • Total Size (Approx.) : 10.3 x 10 x 4cm/4.1″ x 3.9″ x 1.6″ (L*W*T);Cable Length : 8.5cm/3.3″
  • Mount Hole Size : 0.7 x 0.4cm/0.3″ x 0.2″ (L*W);Color : Silver Tone
  • Weight : 328g;Package Content : 1 x Car Power Supply Conver

12V 7,2Ah Battery

12V 7,2Ah battery

12V 7,2Ah battery

 

12v 7Ah Rechargeable Battery (Sealed Lead Acid) AGM Leoch LP12-7

Reliability at affordable Prices
The Leoch 12v 7Ah battery is a high quality battery designed to deliver power when you need it providing exceptional performance with a good service life in all applications. Applications include: Uninterruptible power supply (UPS), electric power system (EPS), emergency backup power supply, emergency light, railway signal, aircraft signal, alarm and security system, electronic apparatus and equipment, communication power supply, DC power supply and auto control systems.

Features

  • Brand New Fully rechargeable 12v 7Ah Battery LP12-7
  • Superb recovery from deep discharge.
  • Datasheet: 12v 7Ah Battery – MSDS: 12v 7Ah Battery
  • All purpose use in a wide range of equipment
  • Uninterruptable Power Supply(UPS)
  • Length: 151mm Width: 65mm Height: 94mm Weight: 2.18Kg
  • Electric Power System(EPS)
  • Emergency backup power supply
  • Emergency light
  • Railway signal
  • Aircraft signal
  • Alarm and security system
  • Electronic apparatus and equipment
  • Communication power supply
  • DC power supply
  • Auto control system

Electrolyte Suspension System
All leoch batteries Use oxygen recombination technology that is maintenance free. PbCaSn alloy for plate grids: less gassing, less self-discharging. High quality AGM separator: extends cycle life and prevents micro short circuits. ABS material: increases the strength of battery container. High purity raw material: ensures low self discharge rate

Warranty
1 Year Manufacturer Warranty

220VAC to 12VDC Power supply Two way radio Base station

220V AC to 12V DC Power Supply

220V AC to 12V DC Power Supply

Specifications

Input Voltage 220V-240V A C
Output Voltage DC 13.8V
Output current 10AMP
Operating Temperature -10 To + 60°C
Ripple + noise < 80 mV P-P
Features
Internal battery back up facility 7 AH (No battery included.)
Short-circuit Protection (with automatic reset function)
Input power Fuse protected
Voltage regulation Fully regulated
Over voltage Protection on output
Low battery state Voltage cut out avoids damage to battery
Thermal cut out Self restoring
Two sets of output terminals 13.8V DC for load
Auxiliary: for connecting to the internal charging leads when an external battery is to be charged. Can
be used for mounting of internal speaker. (not supplied)
Illuminated on/off switch Indicate mains on
Fail light (L.E.D.) Indicate mains failed and battery has discharged to ± 10. 5 Volts
Compact size 240 x 115mm x 170mm
Transformer type Toroidal
IMPORTANT
The power supply is designed to run at full power for a duty cycle of approximately
80% standby, 20% full load.

Switch Mode Power Supplies

Switch mode power supply

Switch mode power supply

 

Switch mode power suplies amps rating
1Amp, 5Amp, 10Amp, 15Amp, 20Amp, 25Amp, 30Amp
The 360W LED power supply or LED transformer is designed to run 12V LED Lights. You will need aconstant current power supply to run LED Strip Lights or LED Rigid Strip Lights but they can be used to run any 12V LED Lights.

For a guide the 360W Power Supply can run:

Input Voltage 220V AC
Output Voltage 12V DC
Wattage 360 Watts
Waterproof No
Dimensions 214*113*50mm (L*W*H)

Solar charge Controlers

20A Solar regulator

20A Solar regulator

 

20 amp LED MPPT Regulator with Load Shed

Solar MPPTs, Pure Sine Wave Bi-Directional Inverters, Wind Turbine Controllers designed and manufactured in South Africa.

 Features:

  • Automatically measures the battery voltage and then sets up the charge parameters (12v-24v)
  • Operates the Solar Panels at the maximum efficiency
  • Charges batteries by setting up the best power point of the solar panels
  • Can improve power extracted from the solar panels by 30% over normal shunt/series pass regulators
  • LED Display
  • Maximum Current 20 Amps.
  • 20 amp Load controller.
  • Temperature controlled Cooling Fan
  • Selectable Low voltage disconnect.
  • 24 hour load or Street Light mode

The 20 amp MPPT Regulator has been developed to create a cost effective solution for small installations. The 20 amp MPPT Regulator continually calculates the module’s maximum power point. When a 75W PV panel is connected directly to a battery, charging at 12 volts, its power production is artificially limited to about 53 watts. This wastes 22 watts or nearly 30% of the available power! MPPT technology used in Microcare MPPT Regulator operates in a very different fashion. The Microcare controller continually tracks the module’s maximum power voltage, in this case 17 volts. It then operates the module at its maximum power voltage to extract maximum power. This provides a 30% increase in power over a conventional charge regulator.

Solar panels Sun Energy

Solar_Power_for_Homes_panels

Solar panels for homes

Sizes and wattages

10W, 30W, 40W, 50W, 70W, 80W, 90W, 100W, 110W, 130W, 160W, 180W, 240W

SOLAR PANEL SPECIFICATION P/N: SW0.4M

Maximum power voltage:4.0V Maximum power current: 100.0mA Dimension: 70*65*3.2mm
1. Outline View:
2. Technical characteristics
(STC Standard Testing Condition: 1000W/M2 AM1.5, 25℃.)
Description of Goods Technical Spec.
Open Circuit Voltage(Voc) 4.6V±8%
Short Circuit Current (Isc) 105mA±8%
Maximum Power Voltage(Vmp) 4.0V±8%
Maximum Power Current(Imp) 100.0mA±8%
Maximum Power(Ppm) 0.4W±8%
3. Mechanical Characteristics
① Monocrystalline Silicon solar cells
② Encapsulated: PC film lamination
4. Quality Assurance
① 3-year limited, work temperature: -10℃-50℃
5. Notes
① This product couldn’t be contacted directly with strong corrosive substances.
② To be avoid to scratch the surface.
③ This product couldn’t be born bending force during transportation & assembling.

Guyed Lattice Mast

IMG_3151-300x225

Tower and Mast manufacturing

WP_20140310_020

Erected Masts and signs

Guyed Lattice Mast and Towers

Mast Layouts

 

 

 

 

 

 

Heavy Duty
Hot dipped Galvanised
8.8 High tensile bolts & nuts
From 3m~15 m Self Support Lattice Mast
From 18~60 m Guyed Lattice Mast
Easy Installation

MECHANICAL SPECIFICATIONS
Leg centres 450mm
Face Width 491mm
Leg size Ø 42.5mm
Bracing size 10 or 12mm
Mass per section 39kg or 43 kg
Guy rope diameter 6mm
Antenna loading – Flat plate area 0.9 m² at
apex and 1m²@ 3 m below apex